Top Products
Filter by
Didn't find what you are looking for? We're here to help!
727 Item(s) found
Arc flash analysis extends well beyond the scope of IEEE 1584 and NFPA 70E methodology for transmission, distribution and renewable energy systems. For many years, the industry has been lacking an “all-in-one” solution for performing arc flash analysis on DC, LV, MV and HV AC systems. ETAP ArcFault™ provides a validated method for performing arc fault simulations in T&D open-air overhead conductor systems plus it provides two methods to determine the incident energy for arc-flash in 3-phase enclosed equipment for 15 to 38 kV renewable energy collector systems. This presentation explains the background and methods for arc fault simulations and explains how ETAP ArcFault helps utilities comply with OSHA requirements to perform arc-flash analysis for systems voltage above 1.0 kV.
Discover how this powerful simulation tool evaluates, verifies, and confirms the operation and selectivity of the ZSI scheme for different types of faults. The ZSI capabilities empower engineers and professionals like you to take control of electrical power system protection and analysis, enhance safety, minimize equipment damage, and validate arc flash mitigation techniques and scenarios.
Are you curious about the limitations of short-circuit standards and their inadequacy in addressing arc-flash incident energy calculations? In this presentation, we will review the challenges posed by these standards with an emphasis on IEC 60909-2016 and provide you with an explanation of ETAP arc-flash solutions to these limitations.
When it comes to running an arc flash hazard analysis study, it's crucial to identify equipment that may expose workers to high incident energy. One of the most hazardous areas is where line side arcing faults can occur. To address this challenge, Annex 0.2.3 of the 70E 2021 standard outlines various industry-accepted incident energy mitigation techniques. However, not all methods effectively tackle line side arcing faults. During the demonstration, you will acquire valuable knowledge on NFPA 70E endorsed mitigation techniques as well as details on ETAP modeling of the ArcBlok technology.