欧美A片

発电機始動ソフトウェア

Generator Start-Up

発电機始動解析

発电機始動計算プログラムは、完全な周波数依存の機械および系統モデルを使用して、通常および緊急状態の条件下で発电機の冷時始動を解析します。
  • 冷時状態から始動する発电機
  • 同期速度に達するまで発电機に負荷かける周波数依存の机械と系统モデルを使用
  • 周波数依存の机械と系统モデルを使用
  • ユーザー定义动的モデルプログラムを利用
  • 始动时の特别な动的タービン动作
  • 过渡安定度解析プログラムへの拡张

 

発电機始動ソフトウェアの能力

  • 重要な负荷への电力の迅速な回復を検讨
  • 最适な负荷时间の决定
  • スケジュールの読み込み顺序
  • 発电機と電動機の始動動作の解析
  • 始動時にガバナーと AVR の動作を検討
  • 原子力発电所などの重要な用途で始動するディーゼル発电機のシミュレーション
  • 商用电源が失われたときに、重大な负荷への电力回復を评価
  • 通常および緊急時に、スタンバイ状態の発电機を冷時状態から始動
  • 电动机の加速と拒否のシミュレーション
  • 解析中のリレー动作を自动的にシミュレート

柔軟な运用

  • 飽和効果による発电機パラメーター補正
  • 初期界磁フラッシュ回路と切换时间
  • 詳細 & ユーザーがプログラム可能な調速機システム制御
  • リレー动作によって制御された系统の切换动作
  • さまざまなリレー制御 (ボルト、Hz、V/Hz、dHz/dt)
  • 不足电圧および不足周波数条件での电动机始动

动的モデル

  • 励磁机
  • 自動電圧調整器 (AVR)
  • ガバナ
  • タービン
  • 電力系統安定化装置 (PSS)

完全な周波数依存の机械と系统モデルを使用して、プログラムは、通常および緊急時の条件下で発电機の冷時状態の始動を解析します。発电機の始動プロセス全体には、自動制御リレーシミュレーションと、励磁机、ガバナ、タービン/エンジン、および電力系統安定化装置 (PSS) の動的動作が含まれています。

同期春電機が同期速度と定格電圧に達する前に、始動発电機の詳細な動的応答をシミュレートし、発电機に接続される電動機、MOV などの緊急負荷を試験するために利用できます。

Videos

This study simulates the impact of step loading on the transient stability of a 2 x 25 MW GTG-based captive power plant at one of the Chemical Fertilizer Plants located at Trombay, India. The variation of electrical frequency and terminal voltage of the generator during the most conservative step loading of one generator unit is studied. The loads divided in steps are switched at certain time intervals to determine whether the frequency profile of the system is within the acceptable limit of ±5%. Load Flow and Short Circuit Studies are performed on the entire power plant distribution network of the fertilizer plant in advance to check the adequacy of equipment ratings during normal and short circuit conditions with all verified input data. The step load response study is carried out with only one GTG unit running in isolation, feeding only the critical emergency loads. Transient behavior of the GTG unit is simulated with IEEE transfer function dynamic models, viz. AC8B model of excitation system (AVR) and IEEE GGOV1 model for turbine governing system using the in-built standard library in ETAP software version 16.1.0. Various parameters of the generator like speed, active and reactive power, bus voltage, and frequency are plotted for determining the transient performance of the GTG unit.

Literature

White Papers

トレーニングとイベント

ETAP Training

トレーニングとイベント

あなたに合ったトレーニングをリクエストして、当社の电気工学ソフトウェアを详しくご覧ください。

今すぐ発见

Explore ETAP Today

今すぐ贰罢础笔を探索

ETAPを30日間無料で試用して、ETAPソリューションの機能を実際に体験してください。このクラウドベースのデモ プラットフォームで、いつでもどこでもETAPの豊富なモジュールと分析結果のコレクションをお試しください。

今すぐオンラインデモを始めましょう!